| |
PUNJABI BULLETS - VESPA MOTO GIZMO
welcome to Eddy Bullets LML & PX VESPA forum. this is a message board for all scooterists who either own or have an interest in LML motorscooters. Swap technical tips or info on the best P Ranges ever made. Eddy will also use this forum for notications or information he thinks might be of interest to you. we also welcome any other types of Indian made scooters such as bajaj Vespa or A.P.I, S.I.L Lambrettas. eddy bullet 01275 810444
|
|
| Return to Website | ||
 First |
 Prev |
 Reply |
 Home |
Next  |
Last  |
| Viewing Page 1 of 1 (Total Posts: 5) |
| Author | Comment |
johny
 Aug 19, 08 - 9:36 AM |
more revs needed
i was wondering if you could help me i have just had my lml set up on a dyno and the bloke commented that the bike runs out of revs in 4th and if it revved more in 4th i would get more top end speed!would changing the exhaust help?im running a sito plus on the 150 kit at the moment and getting about 50/55 mph also the rubber seal under the carb box lid is split does this matter? all help gratefully excepted. cheers johny |
|
eddy
Aug 19th, 2008 - 1:53 PM |
Re: more revs needed
has the reed block been altered? its made for economy and requires alterations to get it to rev out? sound slike it hasn't been done |
|
johny
Aug 19th, 2008 - 2:30 PM |
Re: Re: more revs needed
to be honest i am unsure will have to look into it. in what way do you mean altered? sorry to sound like a noob! |
|
eddy
Aug 20th, 2008 - 3:37 AM |
Re: more revs needed
it needs to have alterations carried out. I cant advise you on this for commercial reasons but there are plenty of dealers out there getting it wrong. sorry, eddy |
|
johny
Aug 20th, 2008 - 9:13 AM |
Re: Re: more revs needed
ok cheers anyway, |
| First |
Prev |
Reply |
Home |
Next |
Last |
bravenet.com